CSDEX 13281824 Lowering Spindle

( Brand: Csdex ), ( Part Type: Spindle ), ( Manufacturer Part Number: 13281824 ), ( Manufacturer Warranty: 1 Year ), ( Placement On Vehicle: Left, Right, Front ), ( Material: Steel ), ( Parcel Included: 2x Drop Spindles ), ( Color: Black ), ( Surface Finish: Polished, Rust Protected ), ( Fitment Type: Direct Replacement )

Review CSDEX Pcs Inch Drop Lowering Spindle Chevy Gmc fits SILVERADO SIERRA 1500 2WD 2007–2016

The CSDEX 13281824 Lowering Spindle is a high-performance aftermarket part designed specifically for the 2007-2016 Chevy Silverado 1500 2WD and GMC Sierra 1500 2WD. This lowering spindle is an excellent choice for those looking to enhance their vehicle's appearance and handling capabilities.

This lowering spindle is engineered to replace the factory-installed spindle assembly, allowing for a lower ride height and improved ground clearance. The new design not only makes your truck look more aggressive but also reduces the unsprung weight, resulting in better responsiveness and handling.

The CSDEX Lowering Spindle is manufactured from high-quality materials, ensuring strength, durability, and precision. Each spindle undergoes rigorous testing to meet the highest standards of quality and performance. The spindle features a durable cast iron construction and hardened steel bearings, ensuring long-lasting performance under heavy loads.

The installation process is relatively straightforward and can be completed in a few hours with basic hand tools. The kit includes all necessary hardware and clear instructions to make the installation process as smooth as possible. It is essential to note that the use of this part may require adjustments to the vehicle's alignment, which should be carried out by a professional mechanic.

This lowering spindle is an excellent addition for truck enthusiasts looking to customize their ride while improving its performance. The CSDEX 13281824 Lowering Spindle is a cost-effective solution to achieve a lower ride height, better handling, and a more aggressive look for your Chevy Silverado 1500 or GMC Sierra 1500 2WD.

Buying a CSDEX 13281824 lowering spindle for a 2007-16 Chevy Silverado/GMC Sierra 1500 2WD involves some considerations. Here are the potential pros and cons:

1. Lowered ride height: The primary reason for purchasing this part is to lower the vehicle's ride height. A lower ride height can improve the appearance of the truck and provide better handling, especially during cornering.

2. Improved stability: A lower center of gravity can lead to improved stability, which can be beneficial for towing or hauling heavy loads.

3. Customization: Lowering spindles are a popular modification among truck enthusiasts, allowing for a unique and personalized look.

1. Cost: Aftermarket parts like lowering spindles can be expensive, and this particular part may require additional modifications or components to function correctly.

2. Installation: Installing aftermarket lowering spindles can be a complex process and may require professional assistance. Improper installation can lead to alignment issues or other problems.

3. Wear and tear: Lowering a vehicle can put additional stress on the suspension components, leading to increased wear and tear. This can result in costly repairs or replacements down the line.

4. Compatibility: Ensure that the lowering spindles are compatible with your specific truck model and year. Incorrectly sized or shaped spindles can lead to fitment issues and potential vehicle damage.

The decision to buy a CSDEX 13281824 lowering spindle for a 2007-16 Chevy Silverado/GMC Sierra 1500 2WD depends on individual preferences and priorities. While the lowered ride height and improved stability are desirable features for some, the cost, installation complexity, potential wear and tear, and compatibility concerns may deter others. Carefully consider these factors before making a purchase.

Before purchasing, ensure that you have a clear understanding of the compatibility and installation requirements. Research reputable suppliers and installers to minimize the risk of issues. Additionally, weigh the benefits against the potential costs and consider alternative modifications if the lowering spindles do not align with your budget or preferences.

Details:

Tighten the wheel hub lock nut to specification. Do not reuse the wheel stud. Remove the splash guard and wheel hub bearing from steering knuckle. Inspection after remove: Check components for deformation,cracks,and other damage,and boots of transverse link ball joint cracks,axial end play,and swing torque.

Too much torque causes axle noise. Does Not fit model's with Aluminum Control Arms or Stamped Steel. Position: Front Left Right. Installation is in the reverse order of removal.

Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten wheel hub lock nut. Apply lubricant to the surface A of joint sub-assembly. New List Item. Remove cotter pin and the nut retainer,Loosen wheel hub lock from drive shaft using power tool.

Too little torque causes wheel bearing looseness. When the product does not meet described function, we define it as defective, in line with warranty period. 2 Pieces inch Drop Spindles Lowering Kit. Remove disc brake rotor.

Remove the engine side cover. Do not reuse the cotter pin. Package Included. Separate drive shaft from wheel hub and bearing, Reposition the aside with wire.

Remove the lower nut and bolt from steering knuckle,Separate transverse link knuckle. Using a piece of wood and suitable tool, tap on the lock nut to disengage drive shaft from wheel hub bearing. Remove the wheel hub and bearing bolts using power tool. Do not pull on wheel sensor harness.

Removal Installation. Put alignment marks A on disc brake rotor and wheel hub bearing. Remove brake caliper torque member bolts, leaving hose attached, reposition the aside with wire. Clean the mating surfaces of joint sub-assembly and wheel hub bearing.

Hold the wheel hub and bearing using a suitable tool. 2 Pcs Drop Lowering Spindle For 2007 16 Chevy GMC Silverado Sierra 1500 2WD Fitment: 2007 2017 2015 model's: Does NOT fit model's with the Aluminum or Stamped Steel Control Arms, 2007 2010 Denali, 2007 2014 Yukon, Yukon XL 15 Tahoe, Suburban Avalanche Cadillac Escalade, NON-HD model's Only. Pull out the front wheel sensor, being careful to turn it as little possible. The matching marks A on disc brake rotor and wheel hub bearing.

part #: 13281824 price

• $128.74

specifications lowerlageen:

• for models: 1500, 2wd, Silverado, Sierra
• for makes: Chevy, Gmc
• for years: 2007-2016
• brand: Csdex
• part type: Spindle
• manufacturer part number: 13281824
• manufacturer warranty: 1 Year
• placement on vehicle: Left, Right, Front
• material: Steel
• parcel included: 2x Drop Spindles
• color: Black
• surface finish: Polished, Rust Protected
• fitment type: Direct Replacement

payments lowerlageen:

• other
• wallet: Paypal
• credit card: Discover

general lowerlageen:

• condition: New
• Auto Permance Parts > Chassis, Suspension Brakes > Lower Kits Parts

offer lowerlageen:

• started: November 6, 2025
• quantity: 10
• sold: 0
• best offers: True
• options: Ship-to-home
• availability: In Stock

shipping lowerlageen:

• type: Fixed
• cost: $0.00
• class: Economy
• transit: 4-9 Days
• carrier: FedEx
• service: FedEx Ground Economy

returns lowerlageen:

• time: 30 Days
• policy: Returns Accepted
• paid by: Seller

seller lowerlageen:

• # reviews: 4240
• city: Ontario, California
• rating: 98.7%

Csdex 13281824 Is Similar To:

• Csdex 10588469 1 4 Inch Npt 4corner Block Manifold Solenoid Valve 300psi Control Air Suspension (35.8% similar) New list item. High quality weather-proof plug-n-play harnesses and accurate wire connections. Hole: thread female 1/4 not. Dual inlet exhaust ports for maximum flow plug extra inlet if not required. Rewired and numbered port to reduce installation time. Max pressure: 300 psi...(September 4th, 2024)
• Csdex 13281825 2 3 Inch Drop Spindles For Chevy C10 Gmc C1500 Lowering Kit 1.25 Rotor 2wd (47.8% similar) Do not reuse the wheel stud. Inspection after remove: check components for deformation,cracks,and other damage,and boots of transverse link ball joint cracks,axial end play,and swing torque. Remove the lower nut and bolt from steering knuckle,separate transverse link knuckle...(August 26th, 2025)
• Csdex 13281823 2 Pcs Inch Drop Spindles For 2002-2018 Dodge Ram 1500 Pickup 2wd Only (67% similar) Remove the engine side cover. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten wheel hub lock nut. Put alignment marks a on disc brake rotor and wheel hub bearing. The matching marks a on disc brake rotor and wheel hub bearing. 2 pcs inch drop...(August 26th, 2025)
• Csdex 13281822 2 Pcs 2.5 Inch Drop Spindles For Chevy C10 Gmc C15 1 Rotor 2wd Only (65.5% similar) Using a piece of wood and suitable tool, tap on the lock nut to disengage drive shaft from wheel hub bearing. Too much torque causes axle noise. Do not reuse the cotter pin. Clean the mating surfaces of joint sub-assembly and wheel hub bearing. Remove cotter pin and the nut retainer...(August 26th, 2025)